AtmosAir® 9000A Mattress Replacement System

Nurses

Administrators

Prescribers

Payers

Patients

Healing at Home
Learn about KCI therapeutic surfaces for the home.

Product Specifications*
Indications
Contraindications
Safety Information
Product Literature
Case Studies – AtmosAir® MRS Family
AtmosAir® with SAT™ Educational Video Resource
HCPCS Code

FEATURES/BENEFITS

SAT™, a system of dynamic air chambers and cutoff valves, helps to maximize body weight displacement and minimize tissue interface pressure by automatically reacting to body movement, altitude and temperature by adjusting the internal air pressure.
Nine air cylinders offer additional support under the shoulders, seat and legs through non-powered pressure relief via nine zones of horizontal pressure distribution.
Power Loss Protection gives uninterrupted pressure relief even in the event of an electrical power failure (alternating pressure not available without power).
A sloped heel section helps to transfer weight off of the delicate heel and onto the calf and thigh area of the leg.
A firm perimeter provides seating support for the caregiver or patient.
Alternating pressure helps to enhance capillary blood flow using a manifold system connected to every other cylinder and powered by an air pump.

Product Specifications*

Dimensions
Foam: Anti-microbial
Length: 75-84 inches by 1 in.
Width: 32-37 inches by .5 in.
Depth: 7 in.
Weight: 33 lbs.
Maximum recommended patient weight**: 500 lbs

Air Pump
Power: 110V/60 Hz
Output: 8 liters per minute
Cycle Time: 10 minutes
Weight: 5 lbs.

Flammability: All mattresses meet TB 106 and TB 117 standards

TB603, ASTM E 1590, TB 129 and BFD IX-II compliance: Available with an optional fire sleeve

Warranty: 5 years, non-prorated

Pump Warranty: 2 years

*Specifications subject to change without notice.
**Consult frame manufacturer regarding individual frame capacity.

MATERIALS
Cover Choices

TheraTex™ nylon: A durable fabric with a blended/butyl rubber backing and a low MVT rate (for use primarily in higher turnover Critical Care areas).
Recovery5^® multi-way stretch: A higher MVT, multi-directional stretch material for enhanced patient immersion and improved pressure distribution (recommended use in lower turnover Med/Surg areas).
Anti-Shear: A multi-layered construction with a metalicyne and microsphere middle layer and a breathable, waterproof and bacteria-resistant cover (available only with Recovery5^® material).

Bottom Choices

Standard: A 10 oz. non-skid bottom material (recommended for use on smooth, pan type bed frame).
Optional: A 12 oz. vinyl bottom material (recommended for use on spring type bed frame).

Anti-microbial: Inherent in both the cover and foam